Description

4 Modes for Different Networks

Standard mode, Port-based Priority mode, Port-based VLAN mode and Extend mode make TEF1118P-16-250W be able to deal with different networks，special for small & Medium-sized IP surveillance & WI-FI coverage project.

Mode 1 : Standard Mode

This is the default working mode of TEF1118P-16-250W. In the mode, all ports can communicate with each other independently.

Mode 2： Port-based Priority Mode

In this mode, ports 1 to 8 have higher priority than other ports, and all ports can communicate with each other. When the switch is connected to multiple IP cameras, you are recommended to use this mode for better smooth transmission with the key IP cameras connected to higher priority ports, and connect the 2 uplink ports (G1，G2/SFP2) to uplink devices (such as NVR or Router).

Mode 3：Port-Based VLAN Mode

In this mode, ports 1 to 16 can communicate with uplink ports (G1，G2/SFP2) , but can’t communicate with each other. You can use this mode to isolate broadcaststorm and prevent ARP virus and DHCP sproofing.

Mode 4: Extend Mode

Due to the complex monitoring environment, the distance from each terminal to the monitoring center is different, some even more than hundred meters. TEF1118P-16-250W can support 250 meters data transmission in the Extend mode, which can save the cost of your project with less devices used.